2 Safety instructions
We have developed and tested the WMS products in compliance with the
basic safety requirements.
Nonetheless, some risks remain.
For this reason, please read these instructions before setting up and operat-
ing the controls.
It is very important to adhere to the safety information listed here and the
warning information in these instructions. Otherwise, any warranty claims
against the manufacturer become void.
Keep these instructions and the instructions of the individual WMS products
for future use.
2.1 Meanings of symbols
and pictographs
The safety information in these instructions is marked with warning symbols.
It is categorised into different warning types depending on the level of poten-
tial danger:
DANGER
warns of an imminently dangerous situation.
Possible consequences may include serious or fatal injury (personal
injury), and property or environmental damage.
WARNING
warns of a potentially dangerous situation.
Possible consequences may include light, serious or fatal injury (personal
injury), property or environmental damage.
CAUTION
Reminder to exercise caution.
Possible consequences of the failure to do so may include property
damage.
The following pictograms and symbols may be affixed to the control unit itself
or to the connected devices, alerting you to potential danger:
WARNING
Warning against dangerous electrical voltage.
NOTE The term NOTE marks important notes and helpful tips.
Example The term Example marks an example.
The square marks an instruction or a prompt for action. Perform this step.
The triangle marks an event or the result of a preceding action.
The black triangle is a bullet point for lists or selections.
Safety instructions
To Next Page
Loading...
