EasyManua.ls Logo

WAREMA WMS - Technical data; WMS Central Transmitter Specifications; Ambient Conditions

WAREMA WMS
132 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
890405_d•en•2015-12-01
We reserve the right to carry out improvements
129
10 Technical data
WMS Central transmitter
Min. Typ. Max. Unit
External power supply unit for charging station
Supply voltage 100 230 240 V AC
Output voltage 5 V DC
Output current 1 A
WMS Central transmitter supply
Battery type
2 x Ni-MH batteries, min. 2100 mAh
or
2 x AA (IEC LR06, "Mignon"))
Supply voltage 2.2 5.0 V DC
RF transceiver
Transmission frequency 2.40 2.48 GHz
Transmission power 10 dBm
Reception sensitivity -101 dBm
Range (outdoors, without interference) 350 m
Enclosure
Dimensions (L×W×H in mm) 93 × 160 × 32
Degree of protection IP30
Safety class III
Automatic operation Type 1
Software class A
Location of use Clean ambient conditions
Conformity
Viewable under www.warema.de
WAREMA Renkhoff SE declares herewith that this radio system type [WMS Central
transmitter] is in compliance with the current guidelines.
Ambient conditions
Operating temperature 0 20 40 °C
Storage temperature 0 50 °C
Rel. humidity
(non-condensing)
10 40 85 %RH
Article numbers
WMS Central transmitter 1002 769
Technical data

Table of Contents

Other manuals for WAREMA WMS

Related product manuals