Button Action/result
Use the function button to select [Daylight saving time].
Here the current setting is indicated by two symbols between
which you can change using the buttons ( : off,
: on).
NOTE When you activate the
[Standard/daylight saving time, automatic]
function in the next menu line, the system automati-
cally switches between standard and daylight saving
time (the entry in the [Daylight saving time] line is
ignored).
Using the function button, select
[Central control unit provides system time].
When this function is activated, the central transmitter sends
the time into the network at regular intervals. All network
components that execute time-controlled functions or have
their own clock function use the time set in the WMS Central
transmitter.
NOTE When there are multiple WMS Central transmitters in a
network, this function should only be activated on one
of these.
Leave the menu using the button.
The [Settings] menu opens again. Pressing this button
several times takes you back to the main menu.
Getting started
To Next Page
Loading...
