Button Action/result
Using the selection cursor, select the
[Allocate channel to another control panel] menu
item.
Call up the function with ok.
The following menu is displayed.
NOTE Only those channels are displayed for selection that
are still empty or that have the same product type as
the channel that you wish to allocate.
Other central transmitter
In the main menu, select the [Products] menu and press the
button.
The following message appears.
Press the ok button.
The following message appears:
A new channel was created
The name of the newly created channel is displayed in the
header, e.g. Channel 3
The following message appears on your central transmitter:
The channel was copied.
Confirm the message with ok. You can now set up the chan-
nel on the other central transmitter (e.g. change the channel
name).
Products
To Next Page
Loading...
