5
MVW01C (COMPACT)
Control rack
The control rack used in the MVW-01C inverter line has the same functions and uses the same boards of the rack used in the MVW-01 3L line.
Refer to the Section 5.6 MVW-01C control rack on page 5-6 .
It is observed only a change in the arrangement of the boards because of the need for compaction of the MVW-01C line
Figure 5.6: MVW-01C control rack
5.1 PANEL CONSTRUCTIVE DETAILS
The MVW-01C is supplied in form of a panel with the dimensions: 1000 mm x 2312 mm x 980 mm (width x height x depth). The complete
panel can be defined, according to the components mounted in each panel division and to their functions, as the union of three compartments:
Rectifier Compartment.
Inverter Compartment.
Control Compartment.
The Figure 5.7 on page 5-6 shows the complete panel drawing. The inverter arms are supplied separately inproper packages.
Arm dimensions: 260 mm x 607 mm x 522 mm (width x height x depth).
Figure 5.7: Dimensions of the MVW-01C panel
MVW01 | 5-6
To Next Page
Loading...
