1
SAFETY INSTRUCTIONS
1 SAFETY INSTRUCTIONS
This manual contains the necessary information for the correct use of the MVW01 frequency inverter.
It was written to be used by people with proper technical training or qualification to operate this kind of equipment.
This manual presents all the functions and parameters of the MVW01, but it is not intended to explain every possible
application of the MVW01. WEG will not take any liabilities for applications not described in this manual.
This product is neither intended for applications whose purpose is to ensure physical integrity and/or life of peo-
ple, nor for any other application in which a fault of the MVW01 may create a situation of risk to the physical
integrity and/or life of people. The designer who applies the MVW01 must provide ways to ensure the safety of
the installation even in case of a failure of the servo drive.
1.1 SAFETY WARNINGS IN THE MANUAL
The following safety notices are used in this manual:
DANGER!
Not following the procedures recommended in this warning can lead to death, serious injuries and
considerable material damages.
DANGER!
Les procédures concernées par cet avertissement sont destinées à protéger l’utilisateur contre des
dangers mortels, des blessures et des détériorations matérielles importantes.
WARNING!
Not following the procedures recommended in this warning can lead to material damages.
✓
NOTE!
The text aims at providing important information for the complete understanding and proper operation
of the product.
1.2 SAFETY WARNINGS ON THE PRODUCT
The following symbols are attached to the product as safety warnings:
E
High voltages are present.
Components sensitive to electrostatic discharge. Do not touch them.
MVW01 | 1-1
To Next Page
Loading...
