6 Screwdriver (TX 20)
7 Battery plug replacement tool
A Battery replacement set in packaging
The battery replacement set is supplied in a package (A)
and contains the components in the photo (2 – 7).
Precondition:
n Cylinder has been removed.
–
Ä
Chapter 4.1 “Dismount old cylinder” on page 48
1. Remove sticker (1) with slot screwdriver.
2. Unfasten screw (2) with enclosed screwdriver (TX 20).
3. Detach (3) thumb-turn.
4. Disconnect battery plug (1) with battery plug replace-
ment tool (2).
5. Unfasten screw (3) with enclosed screwdriver (T6).
Remove knob
Fig. 133: Remove knob
Disconnect battery plug
Fig. 134: Undo screw and battery
plug
Cleaning and maintenance
23.03.2020blueCompact electronic locking system160
To Next Page
Loading...
