6. Remove battery housing (4).
7. Take the used battery (1), including cable (2) and bat-
tery plug (3), from the battery housing (4).
8.
ENVIRONMENT!
Environmental damage is caused when
you dispose of batteries incorrectly.
Dispose of stickers and batteries in the correct
manner.
9. Feed cable (2) and battery plug (3) through the bat-
tery housing (4).
10. Insert new battery (1) from the battery replacement
set into the battery housing (4).
11. Place battery housing (2) in position.
12. Fasten screw (1) with enclosed screwdriver (T6).
13. Use replacement tool (4) to insert battery plug (3).
Remove battery
Fig. 135: Remove battery
Insert battery into battery
housing
Fig. 136: Insert battery
Fit battery housing
Fig. 137: Insert screw and battery
plug
Cleaning and maintenance
23.03.2020 blueCompact electronic locking system 161
To Next Page
Loading...
