NOTICE!
Malfunctions caused by cylinder installed in
the incorrect position.
Incorrectly fitted cylinders cannot be oper-
ated even though users hold locking rights.
– Fit cylinders in a vertical position only.
– Hold cylinder in a vertical position in hand
for tests.
Use cylinders marked '/17' for special installa-
tion situations. Contact Customer Service for
more information.
Ä
“Customer Service” on page 3
NOTICE!
Malfunctions caused by not taking installa-
tion conditions into account.
Malfunctions may arise if you do not take
temperature conditions at the installation
location into account.
– Take temperature limits into account for
installation location for the cylinder con-
cerned.
–
Ä
“Cylinder type 01 and type 05”
on page 181
NOTICE!
Increased risk of burglary due to incorrect
cylinder length.
Cylinders which project out more than 3 mm
from the fitting on the door provide a vulner-
able surface for burglars to gain entry.
– Measure and select cylinder to ensure it
projects a maximum of 3 mm from the fit-
ting.
Malfunctions
Burglary resistance
Select and install cylinder
23.03.2020blueCompact electronic locking system46
To Next Page
Loading...
