Wintriss WPC 1000 User Manual

WPC 1000 User Manual 1125100
Troubleshooting 5-13
Emergency-stop Circuit Driver Failure
Problem: The Emergency-stop input circuit driver has failed or is about to fail.
Remedy: Check E-stop circuit wiring, and correct any problems. If the error persists after
you reset the unit, contact Wintriss Tech. Support for assistance or replacement of
the driver.
Top-stop Circuit Driver Failure
Problem: The Top-stop input circuit driver has failed or is about to fail.
Remedy: Check Top-stop circuit wiring, and correct any problems. If the error persists after
you reset the unit, contact Wintriss Tech. Support for assistance or replacement of
the driver.
F66 or H66
F67 or H67

Wintriss WPC 1000 Specifications

General

Brand	Wintriss
Model	WPC 1000
Category	Controller
Language	English