July 2019
4-7
Xerox® B210 Service Manual
REP 2.1
Repairs - Adjustments
Initial Release
4. Disconnect the Front Cover Support Arm, Figure 2.
Figure 2 Front Cover Support Arm
5. Release two Front Cover Pivots, then remove the Front Cover, Fi
gure 3.
NOTE: A wide blade flat screwdriver can be used to help release the Front Cover Pivot.
Figure 3 Front Cover Removal
NOTE: Remove the Tag Matrix from the old front cover, then place on the new front cover,
F
igure 4.
Figure 4 Tag Matrix on new Front Cover Assembly
To Next Page
Loading...
