Xerox B210 - REP 6.1 Retard Roll Assembly

July 2019
4-45
Xerox® B210 Service Manual
REP 6.1
Repairs - Adjustments
Initial Release
REP 6.1 Retard Roll Assembly
Parts List on PL 6.1
Removal
1. Remove the Paper Tray and any paper from the tray.
2. Pull down on the two latches to open the Retard Roll Cover, F
igure 1.
Figure 1 Retard Roll Cover Latches
3. Rotate the Retard Roll Holder up and remove it from the Paper Tray, Fi
gure 2.
Figure 2 Retard Roll Holder Removal
4. Slide the left-side of the Retard Roll out of the holder to remove it, F
igure 3.
Figure 3 Retard Roll Removal
Replacement
Replacement is the reverse of the removal procedure.
Latches
Retard Roll Holder
Slide Out