Auto Job Release
If an error occurs during a copy or scan job, this sets the time that elapses until the
current job is automatically cleared, and thereby enables the completion of the next
job. When set for On, select a time period between 4-99 minutes, in one minute
increments. Select Off if you do not want to use this feature.
Auto Print
Set the time from the end of print job until the execution of next print job. When set
for On, select a time period between 1-240 seconds, in one second intervals. If Off is
selected, printing can start immediately, once the machine is ready.
Printer Lockout Duration
When set for On, select the time from the start to the end of printer lockout. Set the
values from 0-23 hours and to 59 minutes. If you select Off no printer lockout occurs.
Time Zone
Sets the time difference from Greenwich Mean Time (GMT).
Daylight Savings Time
With this feature enabled, the machine automatically adjusts the current time when
daylight savings time starts and ends. Options include:
• Adjust off: Select this feature if you do not want to use the Daylight Savings feature.
• Adjust by Month, Day & Time: Select this feature to specify the start of the daylight
savings feature, by month, day and time.
• Adjust by Month, Week, Day of Week & Time: Select this feature to specify the
start of the daylight savings feature, by month, week, day of the week and time.
Setting the Machine Clock/Timers
1. Login as administrator.
2. Select Machine Status on the Control Panel.
3. Access the Tools tab on the UI.
4. Select System Settings > Common Service Settings.
5. Select Machine Clock/Timers.
6. Select the item to be set or changed.
7. Select Change Settings.
8. Select the desired setting for the option.
9. Select Save.
The previous screen is displayed.
10. If desired, select another option to set or change and repeat the previous steps.
11. Select Close.
The main Tools tab screen is displayed.
12. Exit administrator mode.
Xerox
®
Color C75 Press9-2
System Administration Guide
Common Service Settings