Xerox C75 User Manual

For MacOS
®
10.2 or later
• Microsoft Internet Explorer 5.2 or later.
• Netscape 7.0 or later.
Ethernet
This section describes the settings for the Ethernet interface.
1. Connect to CentreWare.
2. Click the Properties tab.
3. Click on Connectivity and on Physical Connections to display the items in the folder.
4. Click Ethernet.
5. Set the communication speed for the Ethernet interface using the Ethernet Settings
pull-down menu.
6. Select Apply.
EtherTalk
This section describes the settings for EtherTalk.
1. Perform the following to access the network protocol settings.
a. Connect to CentreWare.
b. Click the Properties tab.
c. Click on the left of Connectivity and on the left of Protocols to display the items
in the folder.
2. Click the EtherTalk.
3. Set the Printer Name.
4. Set Zone Name.
5. Select Apply.
Microsoft Networking (SMB)
This section describes how to configure settings for Microsoft Networking.
1. Perform the following to access the network protocol settings.
a. Connect to CentreWare.
b. Click the Properties tab.
c. Click on the left of Connectivity and on the left of Protocols to display the items
in the folder.
2. Select a transport protocol from the Transport drop down list.
3. Click Microsoft Networking.
4. Select a transport protocol from the Transport drop down list.
Xerox
®
Color C75 Press3-4
System Administration Guide
Using CentreWare Internet Services

Xerox C75 Specifications

General

Print Resolution	2400 x 2400 dpi
Duplex Printing	Yes
Printer Type	Color Laser
Print Speed	75 ppm
Monthly Duty Cycle	Up to 300, 000 pages
Paper Capacity	Up to 5, 900 sheets
Connectivity	Ethernet, USB 2.0
Display	Touchscreen