Calibration
When you select Calibration, you will have the opportunity to move through a series of
steps to optimize the quality of copied jobs. The machine will print a calibration pattern
for you to place on the platen glass. The machine will scan the calibration pattern, and
automatically make adjustments as required.
1. Login as administrator.
2. Access the Tools tab on the UI.
3. Select Setup and Calibration.
4. Select Calibration.
5. Select the appropriate Screen Type, Paper Supply, and Target.
6. Select Start.
7. Follow the screen instructions.
8. Upon completion, select Close to return to Setup and Calibration.
9. Exit administrator mode.
18-13Xerox
®
Color C75 Press
System Administration Guide
Setup and Calibration
To Next Page
Loading...
