Edge Erase - Left and Right
Select the default value for the amount of edge erased from the original in the left and
right directions in Edge Erase (as displayed on the Scan Defaults screen). Select a value
between 0-50 mm, in 1 mm increments.
Quality/File Size
Select the Quality and file size from four options ranging from Quality: Normal, File Size:
Small to Quality: Maximum, File Size: Largest.
E-mail Subject
Type in E-mail Subject
Searchable Text
Select Image Only or Searchable.
Language of the Original
Select either Auto, English, Spanish, or French.
Searchable - Text Compression
Select Disabled or Enabled (Flate Compression).
Scan-to PC Defaults
You can select the default protocol that is used for file transfer from FTP, SMB, and SMB
(UNC format).
1. Select System Settings > Scan Service Settings > Scan to PC Defaults.
2. Select the item to be set or changed.
3. Select Change Settings.
4. Select the default settings for the selected item.
5. Select Save; you are returned to the Scan-to PC Defaults screen.
6. Select Close to return to the Scan Service Settings screen.
Transfer Protocol
Select the default value for the transfer protocol. Select either FTP, SMB, or SMB (UNC
Format)
Xerox
®
Color C75 Press12-4
System Administration Guide
Scan Service Settings
To Next Page
Loading...
Need help?
General
