053 334
Cause: Internal component failure
Remedy: Power off/on the system. If fault continues, contact the Customer Support
Center.
053 335
Cause: Software problem
Remedy: Power off/on the system. If fault continues, contact the Customer Support
Center.
053 400
Cause: Book stacker tray is open
Remedy: Close the tray. If fault continues, power on/off the system. If fault continues,
contact the Customer Support Center.
053 401
Cause: Top cover is open
Remedy: Close the cover. If fault continues, power on/off the system. If fault continues,
contact the Customer Support Center.
053 404
Cause: Adhesive filling tray is open
Remedy: Close the tray. If fault continues, power on/off the system. If fault continues,
contact the Customer Support Center.
053 405
Cause: Trimmer waste tray is full
Remedy: Empty the tray. Follow the instructions displayed on the system’s UI to restart
your print job.
053 406
Cause: Book stacker tray is full
Remedy: Empty the tray. Follow the instructions displayed on the system’s UI to restart
your print job.
053 407
Cause: Cutter blade is nearing or at end of life
Remedy: Contact your service representative.
053 408
Cause: Cutter blade is nearing or at end of life
Remedy: Contact your service representative.
053 409
Cause: Adhesive level is low or empty
Remedy: Add more adhesive pellets to the adhesive filling tray.
Xerox
®
Color 800/1000 Press
16-52
User Guide
Perfect Binder
To Next Page
Loading...
