Xerox Color 800 - Page 274

055 252
Cause: Internal component failure
Remedy: Power off/on the system. If fault continues, contact the Customer Support
Center.
055 253
Cause: Internal component failure
Remedy: Power off/on the system. If fault continues, contact the Customer Support
Center.
055 254
Cause: Internal component failure
Remedy: Power off/on the system. If fault continues, contact the Customer Support
Center.
153 700
Cause: Cutter blade is nearing or at end of life
Remedy: Contact your service representative.
153 701
Cause: Book stacker tray is full
Remedy: Empty the tray. Follow the instructions displayed on the system’s UI to restart
your print job.
153 702
Cause: Book stacker tray is open
Remedy: Close the tray. If fault continues, power on/off the system. If fault continues,
contact the Customer Support Center.
153 703
Cause: Defective books which were not trimmed or a book job that was cancelled in
the middle of the job, were delivered to the book stacker tray.
Remedy: Open the book stacker tray and remove the defective books. Dispose of
accordingly. Close the tray. If fault continues, power on/off the system. If fault continues,
contact the Customer Support Center.
153 704
Cause: Defective books which were not trimmed or a book job that was cancelled in
the middle of the job, were delivered to the book stacker tray.
Remedy: Open the book stacker tray and remove the defective books. Dispose of
accordingly. Close the tray. If fault continues, power on/off the system. If fault continues,
contact the Customer Support Center.
153 705
Cause: Trimmer waste tray is open
Remedy: Close the tray. If fault continues, power on/off the system. If fault continues,
contact the Customer Support Center.
Xerox
®
Color 800/1000 Press
16-70
User Guide
Perfect Binder