Book block (body pages)
Book pages are fed into the binder in the long edge feed (LEF) direction.
Acceptable paper sizes:
8.5 x 11 in./A4 (LEF); 6.93 x 9.84 in./B5 (LEF); SRA4/8.85 x 12.59 in. (LEF)
Acceptable paper weights:
17-43.5 lb. bond (64-163 gsm)
Note
Paper stock weights 106-163 gsm are limited to interleaf, a maximum of 10 sheets
per book, evenly distributed.
Approximate number of sheets per book (thickness)
10-200 sheets of 17 lb./64 gsm - 20 lb./80 gsm bond paper with a maximum thickness
of 1 in./25.4 mm or less for coated stocks
10-150 sheets of 20 lb./80 gsm - 28 lb. 105 gsm bond paper; maximum thickness of
1 in./25.4 mm or less for coated stocks
1-10 sheets of 28 lb./106 gsm - 43.5 lb./163 gsm for all stocks
Cover
Maximum number of 1 sheet per book and the sheet is fed into the binder in the short
edge feed (SEF) direction.
Acceptable paper sizes:
11 x 17 in./A3 (SEF), 9.84 x 13.90 in./B4 (SEF), SRA3/12.59 x 17.71 in. (SEF)
Acceptable paper weights:
24-80 lb. bond (90-300 gsm), 350 gsm Xerox Colotech
Binder’s bypass mode
Refer to the printer’s specifications for acceptable paper sizes and weights. These paper
types can be transported through the binder’s bypass mode directly to the next inline
finishing device. The printer’s specifications can be found earlier in this user guide.
Adhesive container capacity
Approximately 0.8 lb./380 grams; contains approximately enough adhesive for 135
books at 100 pages per book for 8.5 x 11 in./A4, 17 lb. (64 gsm) paper.
Cover inserter tray capacity
200 sheets of 20 lb./80 gsm
Trimmer waste tray capacity
Approximately enough space for paper cuttings from approximately 15 books (when
binding 100 books of 8.5 x 11 in./A4 sheets and trimming them to 6.93 x 9.84 in./B5
size).
16-73
Xerox
®
Color 800/1000 Press
User Guide
Perfect Binder
To Next Page
Loading...
