4. Using a lint-free cloth, clean the belts in Area 5 (right side) by rotating them in the
direction that paper travels.
Continue to wipe the belts as you rotate them until all the belts are clean.
Note
Do not rotate the belts with your bare hands as this will leave grease and dirt on them
and may create paper jams. Rotate the belts by using a lint-free cloth.
5. Grasp handle 5 and gently push in the fuser until it stops.
6. Close the left front door (print engine right side).
9-9
Xerox
®
Color 800/1000 Press
User Guide
Maintenance
To Next Page
Loading...
