8-40 Phaser 3300MFP Service Manual
Service Parts Disassembly
MP Pick Up Assembly
To remove the MP Pick Up Assembly:
1. Lift the latch attached to the left side Stopper and slide it to left.
2. Slide the left side Idle to the left and take out the MP Pick Up Assembly,
as shown below.
Do not grab the rubber part of the Feed1 Roller, it may cause a
malfunction due to contamination.
s3300mfp-133
Stopper
1
2
Idle
MP Pick Up Roller
Feeder Housing
To Next Page
Loading...
