1-2 Phaser 3300MFP Service Manual
General Information
Printer Introduction and Overview
The Xerox Phaser 3300MFP Multifunction Product combines print, copy,
scan, and fax functions in one unit. The print engine has a single-pass laser
design architecture, which offers print speed at 30-ppm, and resolution up to
1200 x 1200 dots-per-inch image quality. The printer supports PostScript 3
and PCL 6 for Base and Network configurations. Automatic 2-sided printing
and network capability are standard features of the Phaser 3300MFP unit.
The scanner uses a CCD for document scanning. Scanning is accomplished
either manually or with the automatic document feeder (ADF). The scanner
provides input for the copy, scan, and fax functions.
The Phaser 3300MFP provides a standard 250-Sheet Tray 1. The Multi-
purpose Tray (MPT) holds 50 sheets, and supports specialty media, card
stock, and envelopes. The Output Tray holds 150 sheets facedown. The Face-
up Tray holds 1 sheet and is used when printing or copying on specialty media
and heavy stock.
The printer options add memory, media capacity, and functionality:
â– Memory upgrades are available to increase from 96 MB standard RAM up
to 320 MB maximum.
â– A 250-Sheet Feeder (Tray 2) is available as an option.
Technical Support Information
The Xerox Phaser 3300MFP Multifunction Product Service Manual is the
primary document used for repairing, maintaining, and troubleshooting the
MFP.
To ensure complete understanding of this product, participation in Xerox
Phaser 3300MFP Service Training is strongly recommended. To service this
product, Xerox certification for this product is required.
For updates to the Service Manual, Service Bulletins, knowledge base, etc.,
go to:
â– Xerox Global Service Net: https://www.xrxgsn.com/secure/main.pl
â– Service Partners: http://www.office.xerox.com/partners
For further technical support, contact your assigned Xerox Technical Support
for this product.
To Next Page
Loading...
Need help?
General
