Xerox Phaser 3300 - Printer Options; Additional Memory; Optional 250-Sheet Feeder (Tray 2)

1-8 Phaser 3300MFP Service Manual
General Information
Printer Options
The Phaser 3300MFP printer options include:
■ Additional Memory (256 MB)
■ 250-Sheet Feeder (Tray 2)
Additional Memory
The standard 96 MB memory consists of 64 MB soldered to the board plus a
32 MB RAM DIMM in the memory slot. The one memory slot supports up to
256 MB for a maximum of 320 MB. Memory modules must meet the following
characteristics:
■ 200 Pin DDR2 DIMM (8 chip type)
■ Unbuffered, Non-parity
The printer’s Configuration page lists the amount of RAM installed in the
printer.
Optional 250-Sheet Feeder (Tray 2)
The Optional 250-Sheet Feeder increases the input capacity of the printer and
can be attached to the printer underneath Tray 1. The Optional 250-Sheet
Feeder is customer installable.
Note
Only one Optional 250-Sheet Feeder is supported.
RAM DIMM
s3300mfp-154