Xerox Phaser 3300 - Copier Section; Telephone Section

Phaser 3300MFP Service Manual 2-27
Theory of Operation
Copier Section
Telephone Section
Copy Mode: Black and White
Scanner Type;
Maximum Size of Original:
(max. width = 218 mm,
max length = 400 mm)
CCD with Flatbed/Platen and ADF
■ Platen: 216 x 297 mm
■ ADF: Legal (216 x 356 mm)
Optical Resolution: 600 x 600 dpi
Copy Quality - H x V:
(User selectable via Content
button)
■ Text: 600 x 300 dpi (default)
■ Text/Photo: 600 x 300 dpi
■ Photo: 600 x 600 dpi
Supported Media Types:
Copy Speed:
(SDMP = Single Document,
Multiple Printout,
MDSP = Multiple Document,
Single Printout)
Plain, Label, Card stock, Transparency
■ Platen, SDMP: 30 cpm (Letter)
■ ADF, SDMP: 30 cpm (Letter)
■ ADF, MDSP: 20 cpm (A4, Text or Text/Photo)
10 cpm (A4, Photo)
Reduce/Enlarge:
■ Platen: 25% - 400% (1% increments)
■ ADF: 25% - 100% (1% increments)
Non-printable Area: 4 mm (Top, Bottom, and each Side)
Copy Count:
(Page count displayed on LCD
during copy operation)
1 to 199
Copy Modes: Text, Text/Photo, Photo
Fixed R/E Setting: 100%, Auto-fit, 2 (4)-Up
Darkness Control: 3 levels
First Copy Output Time
(FCOT):
■ Platen: 8.5 sec. (600 x 300 dpi)
■ ADF: 15 sec. (600 x 300 dpi)
Duplex Copy
■ Manual from MP Tray for SCX-5330N model
■ Automatic Duplex Copy for SCX-5530FN model
Speed Dial: 400 Locations (46 digits maximum per location)
Manual Dial (manual fax): Yes
Last Number Redial: Yes
Automatic Redial: Yes
Pause: Yes (using Redial key)
Ringer Volume: Off, Low, Medium, High
Tone/Pulse: Selectable (Tech Mode Only no Telecom certification for
Pulse mode)