Faxing
c. Touch OK.
d. At the Restart System prompt, touch Close.
9. To enter a prefix dial number:
a. Touch Prefix Dial, then select On.
b. Enter the prefix number, then touch OK.
c. At the Restart System prompt, touch Close.
10. To have the printer generate a cover page for each fax transmission, touch Fax Cover Page, touch
On, then touch OK.
11. To enable or disable the Error Correction Mode:
a. Touch ECM, then touch On or Off.
b. Touch OK.
c. At the Restart System prompt, touch Close.
12. To select the modem speed, touch Modem Speed, select the transmission speed, then touch OK.
13. When sending a manual fax, to have the number of the recipient appear on the Sending Fax screen:
a. Touch Display Manual Fax Recipients, then touch On.
b. Touch OK.
14. Touch the Back arrow to return to the previous menu, or press the Services Home button to return
to Service Home.
Configuring Fax Reports from the Control Panel
1. At the printer control panel, press the Machine Status button.
2. Touch Tools > Admin Settings.
3. Touch Fax Settings.
4. Touch Fax Reports.
5. To print a fax activity report after every 50 fax communications, touch Fax Activity, touch Auto
Print, then touch OK.
6. To print a report of the transmission results after sending a fax, touch Fax Transmit, select an
option, then touch OK.
7. To print a report of the transmission results after sending a fax to multiple destinations, touch Fax
Broadcast, select an option, then touch OK.
8. To print a fax protocol report to help troubleshoot fax problems, touch Fax Protocol, select an
option, then touch OK.
9. Touch the Back arrow to return to the previous menu, or press the Services Home button to return
to Service Home.
Xerox
®
WorkCentre
®
3615 Black and White Multifunction Printer 111
System Administrator Guide
To Next Page
Loading...
Need help?
General
