Xerox WorkCentre 6515 - Page 246

System Administrator Functions
Configure Settings for TIFF and JPEG
Note: Default TIFF and JPEG settings are used when a print driver is not selected. Print driver
settings override default TIFF and JPEG settings configured from the Embedded Web Server.
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 265.
3. Click System > PDL Settings.
4. Click TIFF/JPEG.
5. To specify the default paper size for the output, click Paper Size, then select a paper size.
6. Click OK.
Viewing Version Information for a PDL Protocol
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 265.
3. Click System > PDL Settings.
4. To view version information for a PDL protocol, click the protocol name.
Version information displays at the top of the settings page.
5. To return to the PDL Settings page, click OK or Cancel.
Note: Version information is available for PostScript
®
, TIFF, and XPS.
246 Xerox
®
WorkCentre
®
6515 Color Multifunction Printer
User Guide