Paper and Media
3. Move the width guides to the edges of the tray.
4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready to
use it.
5. Load the paper in the tray. Load hole-punched paper with the holes to the left.
− For 1-sided printing, load Letterhead or pre-printed paper face up with the top edge going into
the printer first.
Xerox
®
WorkCentre
®
6515 Color Multifunction Printer 73
User Guide
To Next Page
Loading...
