Xerox WorkCentre M20 - Page 132

December 2006
4-34
WorkCentre M20, 4118, FaxCentre 2218 Family
REP 5.2
Repairs and Adjustments
8. Remove the MEA unit-pick up assembly, Figure 7.
Figure 7 MEA unit-pickup assembly removal
9. Remove the ADF Upper, Figure 8.
Figure 8 MEA unit-pickup assembly removal
10. Remove the ELA HOU - ADF motor assembly, Figure 9.
Figure 9 ADF motor assembly removal
Replacement
Replacement is the reverse of the removal procedure.
1
Unlatch the MEA unit-
pickup assembly, then
remove.
1
Remove 4 screws.
2
Remove ADF Upper.
2
Remove the ELA HOU - ADF
motor assembly.
1
Remove 3 screws.