Figure 28: DAC 16 Lanes
Features
• The XM655 balun add-on card uses the 8 x 50 x 2 female LPAM-50-01.0-L-08-2-K-TR
connectors and pinout as dened in XM650/655 Connector Pinout. For signal break-out
Carlisle CoreHC2 connectors and cable assemblies are used. Digital IO and I2C are supported
on headers.
Following are the features of XM655 module:
○ 16 ADC dierenal signals to 4 male Carlisle CoreHC2 connector pads
○ 16 DACs dierenal signals to 4 male Carlisle CoreHC2 connector pads
○ 2 ADC inputs – compression mount SMAs through low frequency baluns – Minicircuits
TCM2-33WX+
○ 2 ADC inputs – compression mount SMAs through mid frequency baluns – Anaren
BD1631J50100AHF
○ 2 ADC inputs – compression mount SMAs through high frequency baluns – Anaren
BD3150N50100AHF
Appendix C: XM650/XM655 Balun Add-on Cards for RFSoC EVM
UG1390 (v1.1) July 10, 2020 www.xilinx.com
ZCU216 Board User Guide 78
To Next Page
Loading...
