ADPRO
®
FastTrace™ 2 Series Hardware Installation Manual
21790_05 79
13 DTC Card
The DTC card offers down-the-coax PTZ control for analogue cameras. The DTC card is built in at the
factory; you cannot order it separately. It is inserted on the back of the audio/video connection board.
The DTC card requires software. You can retrieve the current software version of the DTC card in the XOa
client software. For more information, see the XOa Client Software User Manual.
You can insert DTC boards in FastTrace 2E units only with maximum 16 analogue channels. If
you want to install a DTC card in a device with 20 analogue channels, then channels 17-20 will
be removed.
To Next Page
Loading...
Need help?
General
