Yamaha Genos2 - Page 91

91
Genos2 Owner’s Manual
Adjusting the Parameters of Each Part—Mixer
5
4 Set the value of each parameter.
5 Save your Mixer settings.
 To save the Panel Mixer settings:
Register them to Registration Memory (page97).
 To save the Style Mixer Settings:
Save them as a Style le to the User drive or USB ash drive. If you want to recall the settings for future use, select the Style
le saved here.
5-1 Call up the operation display via [MENU] à [Style Creator].
5-2 Touch [Save] to call up the Style Selection display, then save as a Style le (page37).
 To save the MIDI Song Mixer Settings:
When editing and saving the MIDI Song Channel settings, a dierent operation is needed. For details, see “Editing and Saving
the MIDI Song Mixer Settings” below.
Editing and Saving the MIDI Song Mixer Settings
First select a MIDI Song, and edit the parameters. Second, register the edited settings as part of the MIDI Song data (Setup), then
save the Song to the User drive or USB ash drive. If you want to recall the settings for future use, select the Song le saved here.
1 Call up the operation display via [RECORDING] à MIDI [Multi Recording].
2 Touch the Song name “New Song” to call up the Song Selection display, then select the desired
Song.
3 Edit the desired parameters, according to “Basic Procedure for the Mixer” (page90) steps 1–4.
4 Press the [RECORDING] button to call up the MIDI Multi Recording display again.
5 Register the edited settings to the MIDI Song.
5-1 Touch (Stop) to return to the top of the Song.
5-2 Touch [Setup] to call up the Setup display.
5-3 Touch [Execute] to register the edited settings as part of the MIDI Song data.
5-4 Touch [Close] to close the Setup display.
6 Touch [Save] to call up the Song Selection display, then save as a Song le (page37).
NOTE
To reset each parameter to the
default value, touch the number
value or setting and hold it.