7
Genos2 Owner’s Manual
NOTICE
To avoid the possibility of malfunction/ damage to the product, damage to data, or damage to other property, follow the notices
below.
Handling
• Do not connect this product to a public Wi-Fi and/or Internet service directly. Only connect this product to the Internet through
a router with strong password protections. Consult your router manufacturer for information on optimum security practices.
• Do not use this product in the vicinity of a TV, radio, stereo equipment, mobile phone, or other electric devices. Otherwise, this
product or the other device may generate noise.
• When you use the product along with an app on your smart device, such as a smartphone or tablet, we recommend that you
enable “Airplane Mode” on the device to avoid noise caused by communication. When turning on airplane mode, Wi-Fi or
Bluetooth® settings may be turned o. Make sure that the setting is turned on before use.
• Do not expose the product to excessive dust or vibrations, or extreme cold or heat (such as in direct sunlight, near a heater, or
in a car during the day) to prevent the possibility of disguration, damage to the internal components or unstable operation.
(Veried operating temperature range: 5° – 40°C, or 41° – 104°F.)
• Do not place vinyl, plastic or rubber objects on the product, since this might discolor the product.
Maintenance
• When cleaning the product, use a soft and dry (or slightly damp) cloth. Do not use paint thinners, solvents, alcohol, cleaning
uids, or chemical-impregnated wiping cloths.
Saving data
• Edited Song /Style/Voice/MIDI setup data, etc. are lost when you turn o the power to the product. This also occurs when the
power is turned o by the Auto Power O function (page24). Save the data to the product, or to a USB ash drive/an external
device such as a computer (page37). However, the data saved to the product may be lost due to some failure, an operational
mistake, etc. Save your important data onto USB ash drive/an external device such as a computer (pages 37, 109). Before
using a USB ash drive, make sure to refer to page115.
• System Setup data (data other than the edited Song/Style/Voice/MIDI setup data, etc.) is automatically stored, when you change
the settings in a display page and then exit from that page. However, the data is lost if you turn o the power without properly
exiting from the relevant display. For information about the System Setup data, refer to the Parameter Chart of the Data List on
the website.
• To protect against data loss through USB ash drive damage, we recommend that you save your important data onto spare USB
ash drive or an external device such as a computer as backup data.
• If the power switch is not turned on for longer than about a week, the time (clock) setting may be lost.
To Next Page
Loading...
