B95W
Operation
07_Bedienung_en.fm - V1.0 - 1.8.17
255 / 306
7
26
Changing the clamshell grab
Fig. 7-25 Auxiliary control circuit
1 Auxiliary control circuit
2 Couplings
3 Ball valves
4 Depressurized return port
A = left
B = right
Danger due to heavy load
Machine parts may move by accident.
Danger of serious injuries.
Z Wear personal protective equipment.
Z Always begin by ensuring that work attachments will not tilt.
Z Do not enter the danger area.
Z After removing work attachments, secure them to prevent
them from tipping over.
Risk of machine damage
Bucket cylinder piston rod may be damaged.
Z The bucket cylinder piston rod must be fully retracted.
Z Brace the digger with the dozer blade. Ensure that the
wheels have sufficient grip. Only in this way is an optimal
stability achieved.
A
B
3
2
4
1
1
2
3
To Next Page
Loading...
