B95W
Transport
264 / 306
8
08_Transport_en.fm - V1.0 - 1.8.17
27
Setting manual transmission to idle (only or B95W with high-speed version)
Fig. 8-3 Manual transmission idle position
1 Switch rod
Pull or push switch rod (1) to idle position (center position) with appropriate
tool.
Spring-loaded brake “emergency release”
Notice
The preselected gear is automatically engaged upon starting the engine and
the hydraulic system.
Danger due to heavy load
The machine may move unexpectedly. Risk of serious
injury with fatal consequences.
Z Use wedges to prevent the machine from rolling.
Z After towing, activate the spring-loaded brake.
1
To Next Page
Loading...
