B95W
Description
05_Beschreibung_en.fm - V1.0 - 1.8.17
85 / 306
5
11
Regenerate diesel particle filter (optional)
Enabling stoppage regeneration
Requirements are as follows:
Coolant temperature >75 °C.
Operate the parking brake.
Put direction switch in neutral.
Put manual throttle into ‘idle’ position.
Starting stoppage regeneration
Start stoppage regeneration by selecting “particle filter regeneration”. via the
(‘engine monitoring icons’) display.
J ‘Particle filter regeneration light’ glows continuously.
J Warning buzzer sounds three times.
The engine increases its speed to approx. 1700 rpm for the duration of the
regeneration.
Danger from hot surfaces and exhaust gases
During regeneration, exhaust gas temperatures of 650 °C
and higher may arise at the exhaust pipe.
The surface temperature of the diesel particulate filter
module with insulating sheath reaches 200 °C on average.
Risk of burns. Danger of setting fire to objects in the
vicinity.
Z Do not regenerate the diesel particulate filter in enclosed
spaces.
Z Keep a sufficient clearance around the exhaust pipe.
Z Do not perform regeneration in the vicinity of flammable
objects.
Z Do not touch hot surfaces.
Z Wear personal protective clothing.
Notice
The operator can only execute a ‘stoppage regeneration’.
To Next Page
Loading...
