YASKAWA SGD7W - Page 164

8.4 Encoder Cables of 20 m or Less
8.4.2 Encoder Cables for SGM7E and SGM7F Servomotors
8
Cables and User-Assembled Wiring Materials for Direct Drive Servomotors
8-23
 JZSP-C7PA00--E (Standard Cables) and JZSP-C7PA20--E
(Flexible Cables)
* A battery is required only for a multiturn absolute encoder.
Note: Always connect the shield wire from the Encoder Cable to the connector case (shell).
 JZSP-CSP19--E (Standard Cables) and JZSP-CSP29--E
(Flexible Cables)
* A battery is required only for a multiturn absolute encoder.
Note: Always connect the shield wire from the Encoder Cable to the connector case (shell).
Pin
Signal
3
1
Battery Case
Pin
8*
1
5*
2
9
4
Encoder (motor) end
Pin Signal
6
5
4
3
2
1
Shell FG 7
SERVOPACK end
Shield wire
/PS
PS
BAT0
BAT
BAT0
BAT
PG5V
PG0V
Pin
Signal
3
1
Battery Case
Pin Signal
6
5
4
3
2
1
Shell FG
SERVOPACK end
Shield wire
/PS
PS
BAT0
BAT
BAT0
BAT
PG5V
PG0V
Pin
3*
5
4*
6
2
1
Encoder (motor) end
Shell