YASKAWA SGD7W - SGMCV Encoder Cables

8.5 Relay Encoder Cable of 30 m to 50 m
8.5.3 SGMCV Encoder Cables
8
Cables and User-Assembled Wiring Materials for Direct Drive Servomotors
8-35
SERVOPACK-End Relay Encoder Cables
 Selection Table
* Replace the boxes () in the order number with the cable length (30, 40, or 50).
Note: Flexible cables are not available.
 External Dimensions
 Wiring Specifications
* A battery is required only for a multiturn absolute encoder.
Note: Always connect the shield wire from the Encoder Cable to the connector case (shell).
Specification Length (L) Order Number*
For single-turn or multiturn absolute encoder 30 m, 40 m, or 50 m JZSP-UCMP00--E
Encoder endSERVOPACK end
L
Pin
3*
5
4*
6
2
1
Encoder (motor) end
Pin Signal
6
5
4
3
2
1
Shell FG
Shell
SERVOPACK end
Shield wire
/PS
PS
BAT0
BAT
PG5V
PG0V