16-9
IM 765501-01E
Communication Commands
3
2
1
6
5
4
9
8
7
12
11
10
15
14
13
18
17
16
Command Function Page
:COUNt? [MINimum|MAXimum] Queries the average count. 16-25
:ACHange 1|0|ON|OFF Sets the auto V/I mode (ON or OFF). 16-25
:ACHange? Queries the auto V/I mode (ON or OFF). 16-25
:RSENse 1|0|ON|OFF Sets the four-wire measurement (remote sense) (ON or OFF). 16-25
:RSENse? Queries the four-wire measurement (remote sense) (ON or OFF). 16-25
Trigger Commands (TRIGger Group)
:TRIGger
:SOURce TIMer|EXTernal|IMMediate
Sets the trigger source (constant period timer, external trigger,
or no trigger wait). 16-26
:SOURce? Queries the trigger source (constant period timer, external trigger,
or no trigger wait). 16-26
:TIMer <Time>|MINimum|MAXimum Sets the period of the constant period timer. 16-26
:TIMer? [MINimum|MAXimum] Queries the period of the constant period timer. 16-26
Computation Commands (CALCulate Group)
:CALCulate
:NULL
[:STATe] 1|0|ON|OFF Sets the NULL computation state (ON or OFF). 16-27
[:STATe]? Queries the NULL computation state (ON or OFF). 16-27
:OFFSet <Value> Sets the offset value of NULL computation. 16-27
:OFFSet? Queries the offset value of NULL computation. 16-27
:MATH
[:STATe] 1|0|ON|OFF Sets the state of the computation using equations (ON or OFF). 16-27
[:STATe]? Queries the state of the computation using equations (ON or OFF). 16-27
:SELect <String> Sets the definition file of the computation using equations. 16-27
:SELect? Queries the definition file of the computation using equations. 16-27
:CATalog? Queries a list of definition files of the computation using equations. 16-27
:DELete <String> Deletes the definition file of the computation using equations. 16-27
:DEFine <String>,<String> Creates a definition file of the computation using equations. 16-27
:PARameter
:A <Value> Sets equation parameter A. 16-28
:A? Queries equation parameter A. 16-28
:B <Value> Sets equation parameter B. 16-28
:B? Queries equation parameter B. 16-28
:C <Value> Sets equation parameter C. 16-28
:C? Queries equation parameter C. 16-28
:LIMit
[:STATe] 1|0|ON|OFF Sets the state of the comparison operation (ON or OFF). 16-28
[:STATe]? Queries the state of the comparison operation (ON or OFF). 16-28
:UPPer <Value>|MINimum|MAXimum
Sets the upper limit of the comparison operation. 16-28
:UPPer? [MINimum|MAXimum] Queries the upper limit of the comparison operation. 16-28
:LOWer <Value>|MINimum|MAXimum
Sets the lower limit of the comparison operation. 16-28
:LOWer? [MINimum|MAXimum] Queries the lower limit of the comparison operation. 16-28
Store/Recall Commands (TRACe Group)
:TRACe
[:STATe] 1|0|ON|OFF Sets the storage state (ON or OFF). 16-29
[:STATe]? Queries the storage state (ON or OFF). 16-29
:AUTO 1|0|ON|OFF Sets the auto storage state (ON or OFF). 16-29
:AUTO? Queries the auto storage state (ON or OFF). 16-29
:POINts <Integer>|MINimum|MAXimum
Sets the store count. 16-29
:POINts? [MINimum|MAXimum] Queries the store count. 16-29
16.2 Commands
To Next Page
Loading...
