YOKOGAWA 765501 User Manual

16-11
IM 765501-01E
Communication Commands
3
2
1
6
5
4
9
8
7
12
11
10
15
14
13
18
17
16
16
Index
App
Command Function Page
:DIO6? Queries the function (trigger start point, source change, measurement begin,
measurement end, or pulse end) of pin 6 (trigger output) of the external
input/output connector. 16-32
:DIO7 ORIGin|TURN|ALL Sets the function (sweep start point, 1 turn end, or all sweep end) of pin 7
(sweep synchronization output) of the external input/output connector. 16-32
:DIO7? Queries the function (sweep start point, 1 turn end, or all sweep end) of pin 7
(sweep synchronization output) of the external input/output connector. 16-32
:DIO8 ILOCk|OUTPut|ZERO Sets the function (interlock, output control, or zero control) of pin 8
(control output) of the external input/output connector. 16-33
:DIO8? Queries the function (interlock, output control, or zero control) of pin 8
(control output) of the external input/output connector. 16-33
System Commands (SYSTem Group)
:SYSTem
:DISPlay
[:STATe] 1|0|ON|OFF Sets the display state (ON or OFF). 16-34
[:STATe]? Queries the display state (ON or OFF). 16-34
:BRIGht <Integer>|MINimum|MAXimum
Sets the display brightness. 16-34
:BRIGht? [MINimum|MAXimum] Queries the display brightness. 16-34
:CLOCk
:DATE <String> Sets the date. 16-34
:DATE? Queries the date. 16-34
:TIME <String> Sets the time. 16-34
:TIME? Queries the time. 16-34
:TZONe <String> Sets the time zone. 16-34
:TZONe? Queries the time zone. 16-34
:SETup
:SAVE <String> Saves the setup data. 16-34
:LOAD <String> Loads the setup data. 16-34
:CATalog? Queries a list of setup data files. 16-34
:DELete<String> Deletes the setup data file. 16-34
:PON <String> Sets the setup data applied at power on. 16-35
:PON? Queries the setup data applied at power on. 16-35
:ERRor? Queries the error code and message information. 16-35
:REMote Transits to remote mode. 16-35
:LOCal Transits to local mode. 16-35
:KLOCk 1|0|ON|OFF Sets the key lock state (ON or OFF). 16-35
:KLOCk? Queries the key lock state (ON or OFF). 16-35
:BEEPer
[:STATe] 1|0|ON|OFF Sets the beep sound (ON or OFF). 16-35
[:STATe]? Queries the beep sound state (ON or OFF). 16-35
:LFRequency 50|60 Sets the power frequency (50 Hz or 60 Hz). 16-35
:LFRequency? Queries the power frequency (50 Hz or 60 Hz). 16-35
:WAIT <Time> Holds the command parsing operation for a specified time. 16-35
:COMMunicate
:GPIB
:ADDRess <Integer> Sets the GP-IB address. 16-35
:ADDRess? Queries the GP-IB address. 16-35
:RS232
:BAUDrate 9600|14400|19200|38400|57600|115200
Sets the RS-232 baud rate (9600 bps to 115200 bps). 16-36
:BAUDrate? Queries the RS-232 baud rate (9600 bps to 115200 bps). 16-36
:DLENgth 7|8 Sets the RS-232 data length (7 bits or 8 bits). 16-36
:DLENgth? Queries the RS-232 data length (7 bits or 8 bits). 16-36
:PARity NONE|EVEN|ODD Sets the RS-232 parity (none, even, or odd). 16-36
16.2 Commands

YOKOGAWA 765501 Specifications

General

Brand	YOKOGAWA
Model	765501
Category	Measuring Instruments
Language	English