4-8
IM 701310-01E
USB Mouse Operation
• Setup Menu Operation (Similar to the Soft Key Operation)
Selecting an Item on the Setup Menu
Left-click the item you wish to select on the setup menu.
If another menu appears when you select an item, move the p
ointer to the new menu
displaying the item you wish to select and left-click the item.
If an item such as ON or OFF appears when you select an item, move the pointer to
the new frame and left-click within the frame to switch the selected item.
For menus in which items are selected using the rotary knob and SET (see page
4-3), left-click the desired item. Left-click again to confirm the new setting and close
the selection dialog box.
Left-click within this frame to switch
the selected item with each click.
Left-click within this frame to show
the selection menu.
Point to the item you wish to select and
left-click the item to confirm the selection.
• Selecting Toggle Box Items on the Dialog Box
Move the pointer to the item you wish to select and then left-click the item.
The item is selected. Click the selected item again to deselect it.
To close the dialog box, press the ESC key
.
Move the pointer over the item
you wish to select and left-click.
Note
To close an error dialog box, press the ESC key on the front panel.
4.3 Operating the DL9000 Using a USB Keyboard or a USB Mouse
To Next Page
Loading...
Need help?
General
