YOKOGAWA DL9040L User Manual

4-9
IM 701310-01E
Basic Operations
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
App
Index
4.4 Initializing Settings
Procedure
CURSOR
PARAM
TELECOM TEST
WINDOW 1
WINDOW 2
FORM
ACCUM CLEAR
ZOOM 1
ZOOM 2
DISP 2 HISTORY CLEAR
DISP
1
MAG
INTENSITY
SETUP
HELP
HISTORY
MEASURE ANALYSIS
XY
DISPLAY ZOOM
ACCUM
Executing Initialization
1.
Press SETUP.
2.
Press the Initialize soft key. Initialization is executed.
Execute initialization
Cancel initialization
Canceling Initialization
3.
Press the Undo soft key. The settings return to the conditions that existed
immediately before initialization.
Explanation
You can restore the factory default settings. This is useful when you wish to clear
previous settings or start measurement from scratch.
Initialization
Initialization refers to the act of restoring the factory default settings.
Items That Cannot Be Initialized
• Date/Time setting
• Settings related to communications
• English/Japanese language setting
Canceling Initialization
If you initialize the settings by mistake, you can press the Undo Initialize soft key to return
to the settings that existed before the initialization. When you turn OFF the power switch,
the settings that existed immediately before initialization are cleared. Therefore, the Undo
operation is not possible in this case.
Initializing All the Settings
When the power is turned ON while holding down the RESET key, all settings excluding
the date/time setting (display ON/OFF is initialized) are initialized to factory default
settings.

YOKOGAWA DL9040L Specifications

General

Brand	YOKOGAWA
Model	DL9040L
Category	Test Equipment
Language	English