This parameter decides the feature of the main
potentiometer, connected to pin A5 (A3).
This parameter decides the type of the auxiliary
potentiometer, connected to pin A16 (A10).
Sets the motor temperature sensor type.
NONE = no motor thermal sensor switch is connected.
DIGITAL = a digital (ON/OFF) motor thermal sensor is
connected to A33 (A23).
OPTION#1 = an analogue motor thermal sensor is
connected to A33 (A23). The temperature sensor is a
KTY 84-130 PTC (positive thermal coefficient
resistance).
OPTION#2 = an analogue motor thermal sensor is
connected to A33 (A23). The temperature sensor is a
KTY 83-130 PTC (positive thermal coefficient
resistance)
OPTION#3 = an analog motor thermal sensor is
connected to A33 (A23). The temperature sensor is a
PT1000 PTC (positive thermal coefficient resistance).