6 - 10 TC70x Integrator Guide
• Code39 Reduced Quiet Zone - Enables decoding of margin-less Code 39 bar codes (default - False).
Trioptic 39
• Redundancy - Sets the scanner to read the bar code twice before accepting data. A check in the checkbox
indicates that redundancy is enabled (default - True).
ISBN
• Bookland Format - When Bookland is enabled, permits selection of an option for Bookland data.
• Format ISBN-10 - The scanner reports Bookland data starting with 978 in traditional 10-digit format with
the special Bookland check digit for backward-compatibility. Data starting with 979 is not considered
Bookland in this mode (default).
• Format ISBN-13 - The scanner reports Bookland data (starting with either 978 or 979) as EAN-13
in13-digit format to meet the 2007 ISBN-13 protocol.
Interleaved 2 of 5
• Length1 - Use to set decode lengths (default - 14). See Decode Lengths on page 6-13 for more information.
• Length2 - Use to set decode lengths (default - 10). See Decode Lengths on page 6-13 for more information.
• Redundancy - Sets the reader to read the bar code twice before accepting data. A check in the checkbox
indicates that redundancy is enabled (default - True).
• Check Digit
• No Check Digit - A check digit is not used. (default)
• USS Check Digit - Select to check the integrity of all Interleaved 2 of 5 symbols to verify the data
complies with either the Uniform Symbology Specification (USS) check digit algorithm.
• OPCC Check Digit - Select to check the integrity of all Interleaved 2 of 5 symbols to verify the data
complies with either the Optical Product Code Council (OPCC) check digit algorithm.
• Report Check Digit - Transmit Interleaved 2 of 5 data with or without the check digit. A check in the
checkbox indicates to send Interleaved 2 of 5 data with check digit (default - False).
• Convert ITF-14 To EAN13 - Convert 14-character Interleaved 2 of 5 bar codes to EAN-13, and transmit as
EAN-13. The Interleaved 2 of 5 bar code must be enabled and must have a leading zero and a valid EAN-13
check digit. A check in the checkbox indicates that the option is enabled (default - False).
• I2of5 Security Level - Options: I2of5 Security level 0, I2of5 Security Level 1 (default), I2of5 Security
Level 2 and I2of5 Security Level 3.
• I2of5 Reduced Quiet Zone - Enables decoding of margin-less I2of5 bar codes (default - False).
MSI
• Length 1 - Use to set decode lengths (default - 4). See Decode Lengths on page 6-13 for more information.
• Length 2 - Use to set decode lengths (default - 55). See Decode Lengths on page 6-13 for more information.
• Redundancy - Sets the reader to read the bar code twice before accepting data. A check in the checkbox
indicates that redundancy is enabled (default - True).
• Check Digit - With MSI symbols, one check digit is mandatory and always verified by the reader. The second
check digit is optional.
• One Check Digit - Verify one check digit (default).
• Two Check Digits - Verify two check digits.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
