WLAN Configuration 3 - 3
4. Scroll through the list and select the desired WLAN network.
5. Touch the desired network.
Figure 3-2 WLAN Network Security Dialog Box
6. Touch Connect using drop-down list and select User name & password.
7. In the User name text box, enter user name.
8. In the Password text box, enter the password.
9. Touch the Server certificate validation drop-down list and select one of the following:
a. None
b. Always ask me
c. Certificate authority.
10. Touch the EAP method drop-down list and select PEAP MS-CHAPv2 or TTLS.
11. Touch Done.
12. Touch .
Certificate
To set up a Wi-Fi network using a certificate:
NOTE By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring for a
Proxy Server on page 3-5 for setting connection to a proxy server and see Configuring the Device to Use
a Static IP Address on page 3-6 for setting the device to use a static IP address.
To Next Page
Loading...
