3 - 4 TC70x Integrator Guide
1. First install a certificate. See Security chapter.
2. Swipe down from the top of the screen, and touch All settings > Network & wireless > Wi-Fi.
3. Touch the Wi-Fi networking switch to turn on the Wi-Fi radio.
4. The device searches for WLANs in the area and lists them on the screen.
5. Scroll through the list and select the desired WLAN network.
6. Touch the desired network.
Figure 3-3 WLAN Network Security Dialog Box
7. Touch Connect using drop-down list and select Certificate.
8. Touch the Server certificate validation drop-down list and select one of the following:
a. None
b. Always ask me
c. Certificate authority.
9. Touch the EAP method drop-down list and select TLS or TTLS.
10. Touch Done.
11. Touch .
NOTE By default, the network Proxy is set to None and the IP settings is set to DHCP. See Configuring for a
Proxy Server on page 3-5 for setting connection to a proxy server and see Configuring the Device to Use
a Static IP Address on page 3-6 for setting the device to use a static IP address.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
