9 - 14 TC70x Integrator Guide
Using NFC
Near field communication (NFC) enables Windows 10 IoT Mobile Enterprise devices to communicate with an NFC
tag or another NFC-enabled transmitting device. Enterprises that do bulk provisioning can use NFC-based device
provisioning to provide a provisioning package to the device that is being provisioned. NFC provisioning is simple
and convenient and it can easily store an entire provisioning package. For more information go to:
https://msdn.microsoft.com/en-us/library/windows/hardware/mt637870(v=vs.85).aspx
.
To provision the device using an NFC card:
1. Perform a factory reset. See Resetting the TC70x on page 1-9.
2. Follow the on-screen instructions until the Provisioning screen appears.
Figure 9-22 Provision this Device Screen
3. Touch NFC.
4. Touch Next.
5. Next screen is the Tap to Provision screen, which waits on a NFC tag provisioned with a package.
NOTE Use of tags supported by the TC70x.
To Next Page
Loading...
