Zebra TC70x - Chapter 4: Applications; Battery Manager

WLAN Configuration 3 - 7
Figure 3-6 Static IP Settings
3. In the IP address text box, enter an IP address for the device.
4. In the Subnet mask text box, enter the subnet mask number.
5. If required, in the Default Gateway text box, enter a gateway address for the device.
6. If required, in the Network prefix length text box, enter a the prefix length.
7. If required, in the DNS text box, enter a Domain Name System (DNS) address.
8. Touch Done.
9. Touch .
10. Reboot the device.