Carl Zeiss Copyright / Trademark Axio Examiner
2 M60-2-0003 e 05/2012
Knowledge of these instructions is required for operating this equipment. Please make yourself familiar
with the manual’s contents, and, in particular, follow every instruction which concerns the safe operation
of this equipment.
These instructions are subject to modifications for promoting further technical development. This manual
is not covered by any updating service.
© No disclosure or reproduction of this document, and no use or communication of its contents
shall be allowed unless expressly granted. Offenders shall be liable for damages.
All rights reserved for any possible issue of a patent, or for utility-model registration.
All company or product designations used in this operating manual may be either trademarks or
registered trademarks. Any reference to a third-party product shall be deemed for information only, and
shall constitute neither an approval nor a recommendation.
Carl Zeiss Microscopy GmbH shall not assume any liability for the performance or use of any such
products.
Edited by: Carl Zeiss Microscopy GmbH
Carl-Zeiss-Promenade 10
07745 Jena, Germany
microscopy@zeiss.com
www.zeiss.com/microscopy
Carl Zeiss Microscopy GmbH
Königsallee 9-21
37081 Göttingen, Germany
Number of this operating manual: M 60-2-0003 e
Issue date: version 5 - May 01, 2012
To Next Page
Loading...
