Zeiss Axio Examiner - Spares, Wearing Parts and Tools

CARE, MAINTENANCE, TROUBLESHOOTING AND SERVICE
Axio Examiner Spares, wearing parts and tools Carl Zeiss
M60-2-0003 e 05/2012 87
5.4 Spares, wearing parts and tools
Designation Designated use
12 V / 100 W halogen lamp For HAL 100 illuminator
HBO 103 W/2 mercury vapor short arc lamp For HBO 100 illuminator
HBO 50 mercury vapor short arc lamp For HBO 50 illuminator
Ball head screwdriver, width A/F 3 For tube replacement, lamp replacement
Ball head screwdriver, width A/F 2.5
Ball head screwdriver, width A/F 1.5 For setting oblique illumination at the condenser
Eyepiece eyecup Recommendable for reflected-light suppression during low-
luminosity procedures
Eyepiece tube dust cap For blanking off equipment openings which are not in use
Immersol 518 N
®
or 518 F
®
immersion oil
For oil immersion applications
Cleansing paper, 300 sheets For cleaning optical function surfaces
G fuse links (5 x 20 mm);
T 5.0 A/H 250 V 2x
T 2.0 A/H 2x
T 2.5 A 220 – 240 V 2x
T 4 A 100 V; 127 V 2x
Electrical overload protection for power supply
Dust protection set for Axio Examiner For covering the equipment after use