Zeiss Axio Examiner - 3.2 Establishing a mains connection, and switching the power supply units on or off

START-UP
Carl Zeiss Establishing a mains connection, and switching … Axio Examiner
46 M60-2-0003 e 05/2012
3.2 Establishing a mains connection, and switching the power supply units on or off
To avoid any voltage potential which might interfere with electrophysiological studies at the microscope,
Axio Examiner microscopes have no AC power connection of their own. Accordingly, the microscope
lights are each supplied by a separate power supply unit.
3.2.1 Connecting the Axio Examiner mot.
In the Axio Examiner mot. lower microscope part (430031-9010-000), focusing is insured exclusively by
the motor-driven Z-axis positioning of the objective mount or turret.
A motor-operated reflector turret and a motor-operated condenser carrier may be used in addition.
The functions are operated using the key rings located at the pinion knobs of the lower microscope part
or by a docking station (optional). An objective nosepiece cod. (424516-9020-000 or 424516-9030-000)
for automatic objective detection may be used in connection with the docking station.
Figure 3-29 Connecting the Axio Examiner mot.